News

Z&P Steritech Intelligent Equipment Co., Ltd.

2021

The correct steps to operate a fully automatic sterilization pot

The automatic sterilization pot is safe, stable and reliable, and the process back pressure control can be adjusted at will to ensure that the packaging is not deformed.

The automatic sterilization pot is safe, stable and reliable, and the process back pressure control can be adjusted at will to ensure that the packaging is not deformed. The correct operation of the automatic sterilization pot is beneficial to prolong its service life, so what should be done? The editor summarizes the following points for everyone:
(1) The operator of the fully automatic sterilization pot must have received education and training on the residual hazards of the machine and avoiding those hazards.
(2) Modifications, operation steps, and changes in operating mode that are harmful to the safety of operators or machinery may cause injuries and mechanical damage. Please seek professional solutions.
(3) Regularly check whether all the safety devices of the automatic sterilization pot are operating normally. If the safety devices are found to be unable to work normally, please do not operate the machine, and notify the person in charge of management to solve it.
(4) When the machine shuts down due to unknown reasons, please find out the reason before restarting the machine, and obtain the permission of the person in charge of management to start it again. .
(5) When the switch is damaged, do not start the machine until it is repaired.
(6) If abnormal sound, vibration, temperature and load are found to be harmful to the safety during operation, the operator should stop the machine immediately, report to the manager and take appropriate measures.
(7) After the automatic sterilization pot is running, clean it in accordance with the requirements of the instruction manual. When cleaning, be sure to check whether foreign matter enters the food contact part.
(8) Please pack the tools used in the operation to the designated place after use. If foreign objects (such as tools, bolts and nuts) are mixed into the container, it will damage the blades and other parts and cause product quality problems.
(9) For the replacement time of mechanical parts, please follow the instructions in the manual of the automatic sterilizer.
(10) Avoid using flammable, dust-explosive, and flammable solvent-containing products that are close to fully automatic sterilization pots.